TMTeck Instrument Co., Ltd
TMTeck Instrument Co., Ltd
Add to Cart
Cross Hatch Cutter
Specifications
TMTeck design cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching.This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate.
The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy.
Main Technical Parameters:
1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade.
2.Multi-cutting blades spacing:1mm/2mm/3mm
3.The number of square:25squares/100squares
Main technical parameters:
| Working blade | Width of blade end | Hardness | Coat thickness |
| 1mm 6 tooth | 0.03mm, 0.06mm | Hard | 0-60μm |
| 1mm 11 tooth | 0.03mm, 0.06mm | Hard | 0-60μm (0-50μm ASTM) |
| 2mm 6 tooth | 0.03mm, 0.06mm | Hard & Soft | 61-120μm (50-125μm ASTM) |
| 2mm 11 tooth | 0.03mm, 0.06mm | Hard & Soft | 61-120μm (50-125μm ASTM) |
| 3mm 6 tooth | 0.03mm, 0.06mm | Hard & Soft | 121-250μm |
Standard package:
Cross Hatch Cutter:1pcs
Magnifier: 1pcs
Brush:1 pcs
Gummed tape(3M):1pcs
